Electrical contracting
Electrician Kit
Splices, terminations, support hardware and tape for commercial and service electricians.
In stockView kit
HVAC-R · Professional Kit
HVAC & Refrigeration Technician Kit
Flare fittings, sheet-metal screws, duct sealing and controls wiring for HVAC service.
For residential and light-commercial HVAC-R technicians. It combines flare fittings with sheet-metal fastening, duct sealing and low-voltage controls wiring.
- Brass flare unions, nuts and caps
- Self-drilling sheet-metal screws and a matching nut setter
- Wire connectors, quick-disconnects, ring terminals, hose clamps, duct tape and duct seal
Tray layout 16-compartment tray (4 × 4)
142-41/4 Flare Union× 5
242-63/8 Flare Union× 5
3105-41/4 Inv Flare Nut× 5
4156-41/4 Flare Bonnet× 5
5TSHW1034Tek Screw Hex Washer #10 X 3/4"× 100
6TSHW101Tek Screw Hex Washer #10 X 1"× 100
741203Wire Nut Orange 22-14 Ga× 50
841101Wire Nut Grey 22-16 Ga× 50
930397Blue Quick Disc Double Hump Female Lg W/ Heat Shrink× 25
1030387Blue Quick Disc Double Hump Male Lg W/ Heat Shrink× 25
1131115Red Ring Terminal W/ Heat Shrink 1/4"× 25
12HC62040Hose Clamp Ss Sae #40 2-1/16" - 3"× 5
13HC62048Hose Clamp Ss Sae #48 2-9/16" - 3-1/2"× 5
14TIES11Ties Nylon 50lb 11"× 100
15Open, add your own part
16Open, add your own part
What's in the kit 18 items
| Item | Description | Packed | Qty | Unit price | Line total | Add |
|---|---|---|---|---|---|---|
| 42-4 | 1/4 FLARE UNION | Tray | 5 | $1.60 | $8.00 | |
| 42-6 | 3/8 FLARE UNION | Tray | 5 | $1.95 | $9.75 | |
| 105-4 | 1/4 INV FLARE NUT | Tray | 5 | $0.51 | $2.55 | |
| 156-4 | 1/4 FLARE BONNET | Tray | 5 | $0.80 | $4.00 | |
| TSHW1034 | TEK SCREW HEX WASHER #10 X 3/4" | Tray | 100 | $0.03 | $3.00 | |
| TSHW101 | TEK SCREW HEX WASHER #10 X 1" | Tray | 100 | $0.03 | $3.00 | |
| 41203 | WIRE NUT ORANGE 22-14 GAFTZ Industries | Tray | 50 | $0.13 | $6.50 | |
| 41101 | WIRE NUT GREY 22-16 GAFTZ Industries | Tray | 50 | $0.10 | $5.00 | |
| 30397 | BLUE QUICK DISC DOUBLE HUMP FEMALE LG W/ HEAT SHRINKNSPA | Tray | 25 | $0.64 | $16.00 | |
| 30387 | BLUE QUICK DISC DOUBLE HUMP MALE LG W/ HEAT SHRINKNSPA | Tray | 25 | $0.64 | $16.00 | |
| 31115 | RED RING TERMINAL W/ HEAT SHRINK 1/4"NSPA | Tray | 25 | $0.48 | $12.00 | |
| HC62040 | HOSE CLAMP SS SAE #40 2-1/16" - 3" | Tray | 5 | $2.14 | $10.70 | |
| HC62048 | HOSE CLAMP SS SAE #48 2-9/16" - 3-1/2" | Tray | 5 | $2.40 | $12.00 | |
| TIES11 | TIES NYLON 50LB 11"ACT Fastening Solutions | Tray | 100 | $0.13 | $13.00 | |
| A16091 | STANDARD INSULATING BUSHING 3/4 (50) | Loose | 1 | $9.60 | $9.60 | |
| DT | DUCT TAPE SILVER HD 48MM X 55M | Loose | 1 | $18.34 | $18.34 | |
| DX1 | DUCT SEAL 1LB | Loose | 1 | $8.51 | $8.51 | |
| 165MN516 | NUTSETTER MAGNETIC 5/16" X 2-9/16"Vega Industries | Loose | 1 | $6.02 | $6.02 | |
| Kit total | $163.97 | |||||
Need different sizes, more compartments or your own part numbers? Start from this kit in the Kit Builder or ask about custom kitting.
More building trades kits
Plumbing
Plumber Kit
Brass pipe fittings, sealants and clamps for service plumbing calls.
In stockView kit
Carpentry
Carpenter & Framer Kit
Lag screws, carriage bolts, washers and driver bits for framing, decks and site carpentry.
In stockView kit
Roofing & metal siding
Roofing & Siding Kit
Self-drilling screws, sealing washers and rivets for metal roof and siding installs.
In stockView kit
Concrete & anchoring
Concrete & Anchor Installer Kit
Screw, wedge, sleeve and drop-in anchors with matching nuts, washers and masonry bits.
In stockView kit
Facilities maintenance
Facilities & Building Maintenance Kit
An everything-drawer for building engineers: anchors, screws, splices, tape and lube.
In stockView kit
Custom kitting